8/7/2023 0 Comments Voopoo drag 2I think this tank is what spurned the re-release of the Drag 2 kit, as the pods that were originally made for Voopoo’s smaller pod kits can now run via a 510 connector. The refresh edition kit can also be bought in a ‘Drag Mini’ option.Īs part of the Voopoo Drag 2 Refresh Edition kit is the PnP Pod tank. The colour featured here is Aurora, but there is also Dawn, Puzzle, Scarlet, and Ink available at New Vaping. This is only applied to the resin panel on the Drag 2 device. It is listed in the manual that you can charge via USB but it’s always best to charge 18650’s via a separate proper Battery charger for safety reasons. The display will enter sleep mode if idle for 30 seconds and pressing a button will wake it up. You can lock the Drag 2 by pressing the fire button and up/+ simultaneously or flip the display screen orientation by holding fire and the down/- button. To the left are the battery indicators (for each battery), current resistance, voltage, and last puff time. The display screen has a large font for the current power including the mode on the right. You’ll know where you are with the modes as it is indicated on the display screen. The modes are Smart mode, RBA mode, Temp control, FIT mode, and custom mode. The modes can be switched by 3 fast clicks when the device is powered up. To power on the Drag 2, it is the usual 5 fast clicks of the power/fire button. There are also multiple safety protections running on the mod including overcharge and short circuit protection. The chip also supports Ni-200, Titanium, and Stainless Steel so handles Temperature control (for whoever actually uses it). Its resistance range in power mode is from 0.05-3ohms and while in temperature control mode it is 0.05-1ohms. Voopoo’s Drag 2 is powered by their GENE FIT chip with an output wattage range of 5-177W. At the top of the device is the 510 port. The bottom of the Drag 2 has some vent holes and a printed ‘Designed by Voopoo in California Made in China’. Below is the up/down buttons above the mini USB port. Down one side of the device is the main power/fire button above the OLED display. The back of the device, which is the removable magnetic battery door has the printed large ‘Drag’ title. The front of the device has the usual Drag resin panel with the chassis of the device in Black Zinc Alloy. The mod is a good size of 8.8cms height, 5.1cms width, and a depth of 2.6cms. The Drag 2 mod runs with 2 x 18650 Batteries and fires a maximum of 177watts. There is also a printed user manual in amongst the accessories. One of the coils is Voopoo’s PnP-VM6 rated at 0.15 ohms and the other is the PnP-VM5 rated at 0.2 ohms. This includes the PnP pod tank, USB cable, and two coils for the tank. That lifts off to the accessories underneath, again in felt padding. Inside the box, at the top in felt padding is the main Drag 2 box mod. The sleeve slides off and reveals a Voopoo branded thick Black cardboard box. On the bottom of the outer sleeve includes printed box contents, warnings, Voopoo’s contact info, a scratch-for-authenticity panel, and the bar-code. One side of the sleeve includes a printed QR code and the other side includes printed social media info for Voopoo. The sleeve has the printed title and Voopoo branding above the large printed Nicotine warning on the top. Voopoo’s Drag 2 Refresh Edition kit comes in a cardboard box with an outer sleeve. Let’s dip into this Drag 2 Refresh Edition and see how it is. You’ll also find some good vape deals and sales going on over there, so if you haven’t already, go check them out. I’ve placed quite a few orders there over the last year or so, and they have really good prices and delivery within a few days. This was supplied by the folks over at New Vaping who have a big web-store full of top brand vaping hardware, E-liquids, and accessories. We’re going to have a look through that kit today and see what it’s about. Every seasoned vaper will know the Drag 2 mod, due to its popularity over the last few years and it’s now carrying the popular PnP tank in the kit. A hardware review today with a trusty device that’s been repackaged with a newer tank, this is the Drag 2 Refresh Edition by Voopoo.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |